+ Reply to Thread
Page 1 of 7 1 2 3 ... LastLast
Results 1 to 10 of 62

Thread: Custom Grip Colors!

  1. #1
    Banned
    Join Date
    Nov 2003
    Posts
    5,813

    Custom Grip Colors!

    KTRange Secret:
    Make a grip for your P-32 any color you want!
    First, order an Ivory grip from KT - 20 bucks.
    Now... buy a packet of Rit dye powder a shade LIGHTER than what you want. I used Rose Pink for my test piece: it looks that way in the pic, but in person it's almost red.
    Use a two-quart pot, and dump the entire packet of powder into it. Add one quart of water and bring to a boil. Stir up the dye till the salt is fully dissolved, then lower the heat to a slow simmer. Mmmmm!!! No, don't drink it.
    Make sure your grip doesn't have the hammerblock or mag catch in it. Then, lower it into the boiling dye with a fork, gently swishing it around to allow the liquid into all the nooks and crannies.
    Let it simmer for at least 20 minutes. No less!
    The dye will fully penetrate the polymer, not just coat the outside.
    Now, rinse it THOROUGHLY with cold water. Get every trace of salt off; it's not a bad idea to use soap. You don't have to worry about washing the dye off. It's in there!

    Now dry it, put everything together, and either give it to someone or go to the range with your new, "Custom Combat" P-32!
    Flyer

  2. #2
    KTRangePro CherylT's Avatar
    Join Date
    Nov 2003
    Location
    Maine KTRange Gal
    Posts
    420
    Snazzy!
    I like that color! But I think I’m pretty much stuck with black.
    I originally wanted one in ivory and chrome. But I’m too impatient to wait for anything.
    Tell me something though, how is that muzzle part of that frame going to look after several rounds have been put through it? Will there be any discoloration?
    Nice job, Flyer!
    Tc, Cheryl
    Yes, I own guns.

  3. #3
    Banned
    Join Date
    Nov 2003
    Posts
    5,813
    Cheryl,
    Nope, no discoloration...
    The color is embedded through the entire grip, not just the surface... you could cut it in half, and it'd be pink all the way through!!!
    Flyer

  4. #4
    KTRangePro
    Join Date
    Nov 2003
    Location
    Fl
    Posts
    205
    ok, so how did you do it?

    What part of "... shall not be infringed." do people not understand?

  5. #5
    Administrator Midiman's Avatar
    Join Date
    Nov 2003
    Posts
    3,637
    It's a BARBIE GRIP!!
    One, two, three, four, five, six, seven... Oswald was a fag. - McManus
    Nolan Web Development
    Guitars and Synths.com


  6. #6
    norfdet
    Guest
    Would that be the Malibu version? Does this mean that Flyer will get the Corvette to match his bunny suit....................wait a minute...i'm starting to see a trend here.

  7. #7
    Administrator Midiman's Avatar
    Join Date
    Nov 2003
    Posts
    3,637
    Pretty in Pink?
    One, two, three, four, five, six, seven... Oswald was a fag. - McManus
    Nolan Web Development
    Guitars and Synths.com


  8. #8
    Banned
    Join Date
    Nov 2003
    Posts
    5,813
    Well...
    Think I'll stick a Chrome Slide on it and have Reese Witherspoon use it in "Legally Blonde 3"!
    Flyer

  9. #9
    KTRangePro CherylT's Avatar
    Join Date
    Nov 2003
    Location
    Maine KTRange Gal
    Posts
    420
    I want to be like Barbie! She has everything! Uh, now she could have a hot pink p32.
    Flyer, you could be onto something.
    Tc, Cheryl
    Yes, I own guns.

  10. #10
    Junior KTranger
    Join Date
    Dec 2003
    Posts
    58
    Okay, I need atleast one.
    ollllo

+ Reply to Thread
Page 1 of 7 1 2 3 ... LastLast

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Similar Threads

  1. Grip Colors
    By minman in forum P-3AT
    Replies: 8
    Last Post: 07-25-2005, 10:01 AM
  2. K/T Custom Parts?
    By PshootR in forum P-3AT
    Replies: 1
    Last Post: 07-24-2005, 11:32 PM
  3. Custom Tok
    By kahrpacker in forum Other Guns
    Replies: 3
    Last Post: 04-24-2005, 04:22 PM
  4. Pictures of my custom grip color
    By Sixty-Eight Electra in forum P-3AT
    Replies: 23
    Last Post: 03-17-2005, 09:23 AM
  5. Frame colors?
    By norfdet in forum P-3AT
    Replies: 7
    Last Post: 04-13-2004, 10:17 AM

Search tags for this page

custom grips kel-tec 32
,

custom kel tec p11

,
custom kel tec p11 pictures
,
custom pink grips
,

how to dye black keltec grip

,

kel tec p11 colors

,

kel tec p11 pink grips

,
kel tec p3at colors
,
keltec p32 custom grips pink
,
keltec pink gun conversion kit
,
p11 grip conversion
,
pink grip for kel tec 9mm
,
pink grip for kel-tec
,
pink kel tec
,
pkoto of pink grip on the kel tec p32